CAS No.109-99-9,Tetrahydrofuran Suppliers,MSDS download

Products Categories

Pharmaceutical (95)
Organic Chemicals (61)
Agrochemicals (6)
Others (4)
Reagent (3)
Basic Inorganic Chemicals (1)
Plant Extract (1)
Materials (1)

Basic Information

Molecular Structure:
CAS No.:	109-99-9
Name:	Tetrahydrofuran
Article Data:	381
Cas Database

Formula:	C₄H₈O
Molecular Weight:	72.1069
Synonyms:	NCI-C60560;Polytetrahydrofuran;Oxacyclopentane;Tetramethylene oxide;Hydrofuran;Tetrahydrofuraan;Tetraidrofurano;Butane .alpha.,.delta.-oxide;Oxolane;Tetrahydrfuran;Furan, tetrahydro-;Tetrahydrofuranne;THF;Cyclotetramethylene oxide;Furan,tetrahydro-;Furanidine;Diethylene oxide;Butane, 1,4-epoxy-;Tetra hydro furan;
EINECS:	203-726-8
Density:	0.904 g/cm₃
Melting Point:	33-36 ºC
Boiling Point:	68.3 ºC at 760 mmHg
Flash Point:	-21 ºC
Solubility:	miscible with water
Appearance:	Colorless liquid
Hazard Symbols:	Xi,F
Risk Codes:	36/37/38-19-11
Safety:	26-36-33-29-16
Transport Information:	UN 2924 3/PG 2
PSA:	9.23000
LogP:	0.79680

Synthetic route

: 110-00-9
furan

: 109-99-9
tetrahydrofuran

Conditions

Conditions	Yield
With 3% Pd/C; hydrogen In isopropyl alcohol at 219.84℃; under 25858.1 Torr; for 5h; Inert atmosphere;	100%
With hydrogen; acetic acid In water at 39.84℃; for 2h; Inert atmosphere;	98%
With ruthenium; hydrogen; 1-butyl-3-methylimidazolium Tetrafluoroborate at 25℃; under 22502.3 Torr; for 36h; Autoclave; chemoselective reaction;	95%

: 5371-52-8
2-hydroxytetrahydrofuran

: 109-99-9
tetrahydrofuran

Conditions

Conditions	Yield
With phosphoric acid; 5%-palladium/activated carbon; hydrogen at 100℃; under 3750.38 - 13501.4 Torr; for 7h; Reagent/catalyst; Pressure; Temperature; Autoclave;	100%

: 110-63-4
Butane-1,4-diol

: 109-99-9
tetrahydrofuran

Conditions

Conditions	Yield
Trichlorbutylstannan at 80 - 84℃; for 9h;	99%
Trichlorbutylstannan at 80 - 84℃; for 19h; Mechanism; different molar ratios, different times;	99%
zirconium(IV) sulfate at 200℃; under 760.051 Torr; Product distribution / selectivity; Gas phase;	99.5%

: 106-97-8
n-butane

: 109-99-9
tetrahydrofuran

Conditions

Conditions	Yield
Stage #1: n-butane With oxygen at 403℃; under 2175.22 Torr; Stage #2: With hydrogen In Phthalic acid dibutyl ester Product distribution / selectivity;	99.5%

: 110-16-7
maleic acid

A: 109-99-9
tetrahydrofuran

B: 96-48-0
4-butanolide

C: 110-63-4
Butane-1,4-diol

D: 110-15-6
succinic acid

E: 64-19-7
acetic acid

Conditions

Conditions	Yield
With hydrogen; 0.5 percent Pd on Rutile TiO2 at 110℃; Product distribution / selectivity;	A 0.37% B 0.28% C 0.37% D 98.89% E 0.08%

...Expand

: 110-16-7
maleic acid

A: 109-99-9
tetrahydrofuran

B: 96-48-0
4-butanolide

C: 67-56-1
methanol

D: 110-63-4
Butane-1,4-diol

E: 617-48-1
malic acid

F: 110-15-6
succinic acid

G: 64-19-7
acetic acid

H: 71-36-3
butan-1-ol

Conditions

Conditions	Yield
With hydrogen; 0.5percent Pd on Rutile TiO2 at 110℃; Product distribution / selectivity;	A 0.45% B 0.06% C 0% D 0.21% E 0.36% F 98.73% G 0.04% H 0.08%

...Expand

: 110-16-7
maleic acid

A: 109-99-9
tetrahydrofuran

B: 96-48-0
4-butanolide

C: 110-63-4
Butane-1,4-diol

D: 591-81-1
4-hydroxybutanoic acid

E: 110-15-6
succinic acid

F: 64-19-7
acetic acid

G: 71-36-3
butan-1-ol

Conditions

Conditions	Yield
With hydrogen; 0.5percent Pd on Rutile TiO2 at 110℃; Product distribution / selectivity;	A 0.77% B 0.38% C 0.24% D 0.05% E 98.28% F 0.02% G 0.26%

...Expand

: O-methyltetrahydrofuranium perchlorate

A: 109-99-9
tetrahydrofuran

B: 67-56-1
methanol

C: 111-32-0
4-methoxybutanol

Conditions

Conditions	Yield
With perchloric acid; sodium perchlorate; water at 25℃;	A n/a B n/a C 98%

...Expand

: 624-48-6
dimethyl cis-but-2-ene-1,4-dioate

A: 109-99-9
tetrahydrofuran

B: 13436-45-8
2-methoxytetrahydrofuran

C: 96-48-0
4-butanolide

D: 71-23-8
propan-1-ol

E: 64001-06-5
2-(4'-hydroxybutoxy)-tetrahydrofuran

F: 110-63-4
Butane-1,4-diol

G: 71-36-3
butan-1-ol

Conditions

Conditions	Yield
With hydrogen; copper catalyst, T 4489, Sud-Chemie AG, Munich at 150 - 280℃; under 187519 Torr; Neat liquid(s) and gas(es)/vapour(s);	A 1% B n/a C 0.4% D n/a E n/a F 98% G 0.5%

...Expand

: (naphthalene)Yb(THF)3

A: 109-99-9
tetrahydrofuran

B: ytterbium hydroxide

Conditions

Conditions	Yield
With water In toluene byproducts: hydrogen, dihydronaphthalene; reaction time: 20 h; centrifuged, decanted, pptn. (Yb(OH)3) washed with toluene, soln. contains THF and C10H10 (82%)(detn. by GLC);	A 112 % B 98%

Raw Materials

5732-44-5

110-16-7

917-57-7

110-00-9

122-60-1

7732-18-5

10035-10-6

110-87-2

Downstream Products

503-30-0

74-98-6

74-84-0

25714-71-0

93-61-8

123-75-1

93-58-3

538-68-1

Country:
- China (Mainland)(171)
- United States(1)
Business Type:
All

Lab/Research institutions

Trading Company

Manufacturers

Other
Certificate:
Manufacturer

Enterprise Authentication

ISO

GMP

FDA

HALAL

Display:default sort
Suppiers of more reward points first

New supplier

Total:70 Page 1 of 2 1 2 Next>>

Please post your buying leads,so that our qualified suppliers will soon contact you!
*Required Fields

Consensus Reports

NTP Carcinogenesis Bioassay (feed); Clear Evidence: mouse, Some Evidence: rat NTPTR* National Toxicology Program Technical Report Series. (Research Triangle Park, NC 27709) No. NTP-TR-475 ,1998. . Reported in EPA TSCA Inventory.

Standards and Recommendations

OSHA PEL: TWA 200 ppm; STEL 250 ppm
ACGIH TLV: TWA 200 ppm; STEL 250 ppm; BEI: 8 mg/L tetrahydrofuran in urine at end of shift
DFG MAK: 50 ppm (150 mg/m³)
DOT Classification: 3; Label: Flammable Liquid

Analytical Methods

Tetrahydrofuran (CAS NO.109-99-9), its occupational chemical analysis use NIOSH: Tetrahydrofuran, 1609.

Specification

Tetrahydrofuran (THF) is an organic compound with the formula (CH₂)₄O. It is a colorless, water-miscible organic liquid with low viscosity at standard temperature and pressure. The compound is heterocyclic. As one of the most polar ethers with a wide liquid range, it is a useful solvent. With the CAS NO.109-99-9, it is also called 1,4-Epoxybutane ; AI3-07570 ; Agrisynth THF ; Butane, 1,4-epoxy- ; Butane, alpha,delta-oxide ; Butylene oxide ; CCRIS 6276 ; Cyclotetramethylene oxide ; Diethylene oxide.

Physical properties about Tetrahydrofuran are: (1)ACD/LogP: 0.473; (2)ACD/LogD (pH 5.5): 0.47; (3)ACD/LogD (pH 7.4): 0.47; (4)ACD/BCF (pH 5.5): 1.35; (5)ACD/BCF (pH 7.4): 1.35; (6)ACD/KOC (pH 5.5): 43.07; (7)ACD/KOC (pH 7.4): 43.07; (8)#H bond acceptors: 1; (9)Index of Refraction: 1.417; (10)Molar Refractivity: 20.052 cm³; (11)Molar Volume: 79.76 cm³; (12)Polarizability: 7.949 10-24cm³; (13)Surface Tension: 28.8099994659424 dyne/cm; (14)Density: 0.904 g/cm³; (15)Flash Point: -17.222 °C; (16)Enthalpy of Vaporization: 29.81 kJ/mol; (17)Boiling Point: 68.278 °C at 760 mmHg; (18)Vapour Pressure: 152.442993164063 mmHg at 25°C

Preparation of Tetrahydrofuran: Tetrahydrofuran (CAS NO.109-99-9) can be manufactured from butane by using circulating solids technology in which butane is oxidized to maleic acid and thence to tetrahydrofuran
Manufacture of tetrahydrofuran from butane

Uses of Tetrahydrofuran: The main application of Tetrahydrofuran (CAS NO.109-99-9) is as an industrial solvent for PVC and in varnishes.
Tetrahydrofuran(CAS NO.109-99-9) can be polymerized by strong acids to give a linear polymer called poly(tetramethylene ether) glycol (PTMEG), also known as PTMO, polytetramethylene oxide. The primary use of this polymer is to make elastomeric polyurethane fibers like Spandex. THF can be used in hydroboration reactions to synthesize primary alcohols, and as a solvent for organometallic compounds such as organolithium and Grignard reagents. It is often used in polymer science. It can be used to liquefy old PVC cement, and is often used industrially to degrease metal parts.

When you are using this chemical, please be cautious about it as the following:
1. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice;
2. Wear suitable protective clothing;
3. Take precautionary measures against static discharges;
4. Do not empty into drains;
5. Keep away from sources of ignition - No smoking;

You can still convert the following datas into molecular structure:
(1)InChI=1S/C4H8O/c1-2-4-5-3-1/h1-4H2;
(2)InChIKey=WYURNTSHIVDZCO-UHFFFAOYSA-N;
(3)SmilesC1CCOC1

The toxicity data is as follows:

Organism	Test Type	Route	Reported Dose (Normalized Dose)	Effect	Source
guinea pig	LD50	oral	2300mg/kg (2300mg/kg)		Gigiena i Sanitariya. For English translation, see HYSAAV. Vol. 34(9), Pg. 114, 1969.
guinea pig	LDLo	intraperitoneal	500mg/kg (500mg/kg)	LIVER: FATTY LIVER DEGERATION	American Industrial Hygiene Association Journal. Vol. 35, Pg. 21, 1974.
human	TCLo	inhalation	25000ppm (25000ppm)	BEHAVIORAL: GENERAL ANESTHETIC	"Toxicology of Drugs and Chemicals," Deichmann, W.B., New York, Academic Press, Inc., 1969Vol. -, Pg. 580, 1969.
mouse	LCLo	inhalation	24000mg/m3/2H (24000mg/m3)	BEHAVIORAL: SOMNOLENCE (GENERAL DEPRESSED ACTIVITY) LUNGS, THORAX, OR RESPIRATION: DYSPNEA BEHAVIORAL: MUSCLE WEAKNESS	Toksikologiya Novykh Promyshlennykh Khimicheskikh Veshchestv. Toxicology of New Industrial Chemical Substances. For English translation, see TNICS*. Vol. 5, Pg. 21, 1963.
mouse	LD50	intraperitoneal	1900mg/kg (1900mg/kg)		Sangyo Igaku. Japanese Journal of Industrial Health. Vol. 24, Pg. 373, 1982.
rabbit	LC	inhalation	> 1200ppm/4H (1200ppm)	SENSE ORGANS AND SPECIAL SENSES: OTHER CHANGES: OLFACTION	Sumitomo Sangyo Eisei. Sumitomo Industrial Health. Vol. 18, Pg. 89, 1982.
rat	LC50	inhalation	21000ppm/3H (21000ppm)	BEHAVIORAL: SLEEP GASTROINTESTINAL: NAUSEA OR VOMITING LUNGS, THORAX, OR RESPIRATION: RESPIRATORY STIMULATION	Sumitomo Sangyo Eisei. Sumitomo Industrial Health. Vol. 20, Pg. 141, 1984.
rat	LD50	intraperitoneal	2900mg/kg (2900mg/kg)		Sangyo Igaku. Japanese Journal of Industrial Health. Vol. 24, Pg. 373, 1982.
rat	LD50	oral	1650mg/kg (1650mg/kg)		GAF Material Safety Data Sheet.