Products Categories
| CAS No.: | 75-15-0 |
|---|---|
| Name: | Carbon disulfide |
| Article Data: | 609 |
| Cas Database | |
| Molecular Structure: | |
|
|
|
| Formula: | CS2 |
| Molecular Weight: | 76.143 |
| Synonyms: | Carbonbisulfide;Carbon bisulphide;Carbon sulfide (CS2);Dithiocarbonic anhydride; |
| EINECS: | 200-843-6 |
| Density: | 1.259 g/cm3 |
| Melting Point: | -111 °C |
| Boiling Point: | 46.22 °C at 760 mmHg |
| Flash Point: | -30 °C |
| Solubility: | 2.9 g/L (20 °C) in water |
| Appearance: | colourless to light yellow liquid with an unpleasant odour |
| Hazard Symbols: |
 F,  T
|
| Risk Codes: | 11-36/38-48/23-62-63-39/23/24/25-23/24/25 |
| Safety: | 16-33-36/37-45-7 |
| Transport Information: | UN 1131 3/PG 1 |
| PSA: | 64.18000 |
| LogP: | 1.01810 |
| Conditions | Yield |
|---|---|
| byproducts: S(x)Cl2; (N2), bomb reed, heated at 250°C for 24 h; cooled in liquid air in vac., distd.; | A 95% B n/a |
| byproducts: S(x)Cl2; (N2), bomb reed, heated at 250°C for 15 h; cooled in liquid air in vac., distd.; | A 86% B n/a |
| byproducts: S(x)Cl2; (N2), bomb reed, heated at 210°C for 8 d; cooled in liquid air in vac., distd.; | A 70% B n/a |
methanol
methylthiol
A
carbon disulfide
B
Dimethyldisulphide
C
dimethyltrisulfane
| Conditions | Yield |
|---|---|
| Stage #1: methanol; methylthiol With hydrogen sulfide; aluminum oxide with 14percent by weight of potassium tungstate at 400℃; Stage #2: With sulfur; N-cyclohexyl-cyclohexanamine | A n/a B 94.9% C n/a |
| Conditions | Yield |
|---|---|
| In melt at 180℃; for 0.166667h; Inert atmosphere; | A n/a B 88% |
| Conditions | Yield |
|---|---|
| byproducts: CO, CO2; at 1400 K, with excess of carbon; | A 81.16% B 10.82% C 8.02% |
| byproducts: CO, CO2; at 1000 K, with excess of carbon; | A 37.08% B 3.22% C 59.7% |
sulfur
chloroform
A
hydrogenchloride
B
disulfur dichloride
C
carbon disulfide
| Conditions | Yield |
|---|---|
| (N2), bomb reed, heated at 205°C for 60 h; cooled in liquid air in vac. for a week, distd.; Raman spectr.; | A n/a B 80% C n/a |
| Conditions | Yield |
|---|---|
| With hydrogen sulfide In neat (no solvent) reaction of H2S with gaseous CCl4 on heating to 870°C; catalyst: asbestos powder;; | A n/a B 71.5% |
| With hydrogen sulfide In neat (no solvent) reaction of H2S with gaseous CCl4 on heating to 870°C;; | A n/a B 58% |
| With hydrogen sulfide In neat (no solvent) reaction of H2S with gaseous CCl4 on heating to 870°C;; | A n/a B 22.1% |
bis (2-chloroethyl) sulphide
acetylene
A
thiophene
B
carbon disulfide
C
Benzo[b]thiophene
D
benzene
| Conditions | Yield |
|---|---|
| With disulfide oil at 650℃; for 1.75h; Further byproducts given; | A 68% B 0.09 g C 0.12 g D 0.25 g |
thiourea
A
carbon disulfide
| Conditions | Yield |
|---|---|
| With tetraphosphorus decasulfide at 140℃; for 40h; | A n/a B 5% C 58% |
| With ammonium hydroxide; tetraphosphorus decasulfide 1.) 40 h, 140 deg C; Yield given. Multistep reaction. Yields of byproduct given; |
| Conditions | Yield |
|---|---|
| at 150 - 200℃; for 0.5h; further O-alkyl-S-phthalylglycyl xanthates; | A n/a B 53% |
2,2-Dimethyl-1,3-diphenyl-7-thia-2-sila-bicyclo[3.2.0]hept-3-ene-6-thione
A
carbon disulfide
B
1,1-dimethyl-2,5-diphenylsilole
| Conditions | Yield |
|---|---|
| In tetrahydrofuran for 67h; Irradiation; or 180 deg C, 15 h; | A n/a B 40% |
Please post your buying leads,so that our qualified suppliers will soon
contact you!
*Required Fields
Molecular Formula: CS2
Molecular Weight: 76.139 g/mol
EINECS: 200-843-6
Flashing point: -30 °C
Index of Refraction: 1.627
Density: 1.262 g/mL
Vapour Pressure: 352 mmHg at 25 °C
Boiling Point: 46 °C
Melting point: -111 °C
Storage tempreture: 2-8 °C
Water solubility: 2.9 g/L at 20 °C
Solubility: Soluble in water
Sensitive: Hygroscopic
Appearance: Colourless to light yellow liquid with an unpleasant odour
Structure of Carbon disulphide (CAS NO.75-15-0):
IUPAC Name: Methanedithione
Product Category of Carbon disulphide (CAS NO.75-15-0): Inorganics;Pesticides;Stable Isotopes;Aluminum Bottles;Alphabetical Listings
Carbon disulphide (CAS NO.75-15-0) is used frequently as a building block in organic chemistry as well as an industrial and chemical non-polar solvent.
Carbon disulphide (CAS NO.75-15-0) once was manufactured by combining carbon and sulfur at high temperatures. A lower temperature reaction, requiring only 600 °C utilizes natural gas as the carbon source in the presence of silica gel or alumina catalysts.
| 1. | mmo-sat 100 µL/plate | NIOSH* National Institute for Occupational Safety and Health, U.S. Dept. of Health, Education, and Welfare, Reports and Memoranda 5AUG77 . | ||
| 2. | sce-hmn:lym 10,200 µg/L | BCTKAG Bromatologia i Chemia Toksykologiczna. 14 (1981),115. | ||
| 3. | ihl-hmn LCLo:4000 ppm/30M | 29ZWAE Practical Toxicology of Plastics Lefaux, R.,Cleveland, OH.: Chemical Rubber Company,1968,118. | ||
| 4. | ihl-hmn LCLo:2000 ppm/5M | TABIA2 Tabulae Biologicae. 3 (1933),231. | ||
| 5. | unr-man LDLo:186 mg/kg | 85DCAI Poisoning; Toxicology, Symptoms, Treatments. 2 (1970),73. | ||
| 6. | orl-rat LD50:3188 mg/kg | GISAAA Gigiena i Sanitariya. 31 (1)(1966),13. | ||
| 7. | ihl-rat LC50:25 g/m3/2H | 85GMAT Toxicometric Parameters of Industrial Toxic Chemicals Under Single Exposure Izmerov, N.F., et al.,Moscow, USSR.: Centre of International Projects, GKNT,1982,32. | ||
| 8. | orl-mus LD50:2780 mg/kg | GISAAA Gigiena i Sanitariya. 31 (1)(1966),13. | ||
| 9. | ihl-mus LC50:10 g/m3/2H | 85GMAT Toxicometric Parameters of Industrial Toxic Chemicals Under Single Exposure Izmerov, N.F., et al.,Moscow, USSR.: Centre of International Projects, GKNT,1982,32. GISAAA Gigiena i Sanitar |
Reported in EPA TSCA Inventory. EPA Genetic Toxicology Program. Community Right-To-Know List. EPA Extremely Hazardous Substances List.
Hazard Codes: 
F,
T
Risk Statements: 11-36/38-48/23-62-63-39/23/24/25-23/24/25
R11:Highly flammable.
R23/24/25:Toxic by inhalation, in contact with skin and if swallowed.
R36/38:Irritating to eyes and skin.
R48:Danger of serious damage to health by prolonged exposure.
R62:Risk of impaired fertility.
R63:Possible risk of harm to the unborn child.
Safety Statements: 16-33-36/37-45-7
S7:Keep container tightly closed.
S16:Keep away from sources of ignition.
S33:Take precautionary measures against static discharges.
S36/37:Wear suitable protective clothing and gloves.
S45:In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
OSHA PEL: TWA 4 ppm; STEL 12 ppm (skin)
ACGIH TLV: TWA 10 ppm (skin); BEI: 5 mg (2-thiothiazolidine-4-carboxylic acid (TTCA))/g creatinine in urine
DFG MAK: 5 ppm (16 mg/m3); BAT: 8 mg/L of 4-thio-4-thiazolidine carboxylic acid (TTCA) at end of shift
NIOSH REL: (Carbon Disulfide) TWA 1 ppm; CL 10 ppm/15M
DOT Classification: 3; Label: Flammable Liquid, Poison
For occupational chemical analysis use NIOSH: Carbon Disulfide, 1600.
Carbon disulphide , its cas register number is 75-15-0. At very high levels, carbon disulfide may be life-threatening because it affects the nervous system. Significant safety data come from the viscose rayon industry, where both carbon disulfide as well as small amounts of H2S may be present. A human poison by unspecified route. Human reproductive effects on spermatogenesis by inhalation. Experimental teratogenic and reproductive effects. The main toxic effect is on the central nervous system, acting as a narcotic and anesthetic in acute poisoning with death following from respiratory failure. Flammable liquid. A dangerous fire hazard when exposed to heat, flame, sparks, friction, or oxidizing materials. Severe explosion hazard when exposed to heat or flame. Ignition and potentially explosive reaction when heated in contact with rust or iron. Mixtures with sodium or potassium-sodium alloys are powerful, shock-sensitive explosives. Explodes on contact with permanganic acid. Potentially explosive reaction with nitrogen oxide, chlorine (catalyzed by iron). Reacts with metal azides to produce shock- and heat-sensitive, explosive metal azidodithioformates.
Carbon disulphide (CAS NO.75-15-0) is hazardous, so the first aid measures and others should be known. Such as: When on the skin: first, should flush skin with plenty of water immediately for at least 15 minutes while removing contaminated clothing. Secondly, get medical aid. Or in the eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Then get medical aid soon. While, it's inhaled: Remove from exposure and move to fresh air immediately. Give artificial respiration while not breathing. When breathing is difficult, give oxygen. And as soon as to get medical aid. Then you have the ingesting of the product: Do not induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water, and get medical aid immediately. Notes to physician: Effects may be delayed. Observe patient.
